If you’re looking for a fence charger, you’ve come to the right place. This article is going to teach you how to use a parmak fence charger and how to check if your fence charger is working correctly.
Installing a parmak fence charger
Parmak fence chargers are a type of electrical appliance that is designed to change the electric charge of a wire into safe power. They are ideal for livestock, gardens, and small to medium sized open spaces.
The best Parmak fencer models have a high performance and are low impedance. This means that they can be used in areas with poly tape or high tensile multi-wire fences. You can also get a Parmak model with a built-in performance meter, which allows you to determine the strength of your fence even without sunlight.
When purchasing a Parmak fencer, be sure to check the U/L (Underwriters Laboratories) listing to make sure it has been thoroughly tested. It will also guarantee the unit is safe to use under any conditions.
Parmak’s DF-SP-LI fencer is affordable and features a built-in performance meter that shows voltage output. In addition, it is equipped with lightning protection.
All models of Parmak fence chargers are manufactured with durable, quality components. The housings are made from special steel and are guaranteed against rust. A five-year warranty is included with your purchase.
Parmak fencers feature a unique, low impedance technology, which reduces the chance of a severe electric shock. These fencers can reach animals within a fraction of a second.
Parmak also offers a free lightning protection system with every fence charger. Lightning is a devastating force that can damage equipment connected to the power line, including fence chargers.
Checking for loose connections in the fence wire
When you are repairing or upgrading your fence, it is important to do it right. Not only will you save time, but you will also be saving money in the long run. Whether it is a high-tensile wire or a steel post, be sure to inspect it for damage before you splice or cut it.
You should also check your ground rods. Ensure they are 3 to 4 feet (1.2 to 1.5 meters) apart. They should also be at least 6 to 8 feet (1.8 to 2.4 meters) long.
The most important part of any electric fence is the grounding system. Incorrect grounding can cause all sorts of problems. It can lead to electrical shocks, blown fuses and even sparks. To prevent these hazards, install the right type of grounding system.
While you are checking out your grounding system, test the power from your batteries and outlets. This will tell you if you have a problem and help you decide if you need to replace your fence or not.
A fence with a dead short may not be the best way to keep your pets and kids out. But it will certainly be a hassle. Make sure that your post is located below the frost line.
It is also a good idea to get a fence tester. There are many available on the market. Some of these will even display the voltage and other measurements in a simple graph.
Loss of energy between stored Joules and actual amount of Joules on the fence wire
Using a voltmeter to measure fence voltage is a common practice among farmers. However, this measurement does not reveal all that much about the fence itself.
The best way to find out how much energy a fence charger can transmit is through a simple comparison of the output joules. This measurement tells you how much energy is transferred to a load on a pulse.
The first thing to understand is that joules are not the same as watts. Likewise, the highest joules a fence charger can deliver is not the same as the greatest number of volts.
For example, an energiser with a rating of one stored joule will not power a fence more than a couple of kilometers away. Similarly, a large energiser can deliver a peak output joule for loads that are outside its usable load range.
However, the best fence energizer is not just the largest energiser or the one with the longest rated distance. It also must be powerful enough to produce a jolt in all conditions.
In addition, it must be fitted with a ground wire-return system. This system ensures that the live wire does not short circuit to the ground wire.
If your energizer has a capacitor, it will be able to store a lot of energy. A high stored energy can give you lots of ringing, but can also cause your energiser to spit out a short, sharp pulse.